Venturi HP-14 PWM
The Venturi High Pressure Series PWM fans are optimized for high-restriction airflow scenarios, making them an excellent choice for usage on large heatsinks, on radiators, or in other highly restrictive scenarios
- True FDB-bearings provides silent operation and a long lifespan
- Counter-balanced magnet reduces axial tension on the bearing
- Integrated vibration-dampening corners
Designed for strength and silence
These fans can move an amazing amount of air through restricted environments compared to other fans at the same, minimal noise level.
The HP-14 comes with two sets of solid vibration-dampening rubber corners: one for standard 140 mm fan hole spacing (125 mm) and one compatible with the standard 120 mm hole spacing (105 mm). The Venturi High Pressure Series PWM fans are ideal for anyone looking for a perfect balance between high performance and low noise built from sturdy, high quality materials.
Key features
-
Made from high-grade glass fiber reinforced thermoplastic polymer
-
Ground-breaking airflow, perfect for low-restriction usage scenarios
-
Aerodynamical stator struts reduce noise and unwanted turbulence
-
Strategically placed notches on the blades further reduce and diffuse any humming noise produced when the blades pass the stator struts
-
The trip wire technology introduces a micro-turbulent layer that combats elements that negatively affect performance, resulting in quieter operation
Smart PWM support starting at 400 RPM
Featuring PWM control with a very wide speed range, starting at only 400 RPM (400 +/- 100 RPM), ideal for CPU heat sinks or radiators, where the motherboard can control the fan speed based on the CPU temperature.
-
Ideal for CPU heatsinks or radiators
-
Comes with a PWM Y-cable, for connecting additional fans to a single PWM header on your motherboard or PWM fan controller
FDB-bearings
True FDB-bearings, providing silent operation and long lifespan
Balanced magnet
Counter-balanced magnet reduces axial tension on the bearing
Vibration dampening
Integrated vibration-dampening corners, made from solid high-quality synthetic rubber
Reviews
Language
"Venturi HP-14 PWM is more likely focused on cooling CPU heat sink or water cooling radiators with high density fin structure since it offers pretty exciting static pressure level and will definitely provide the option to achieve stable CPU operation and overclocking results."
"The good:
+ High quality felling and excellent product presentation
+ Metal plate for the rotor
+ Modular corners for increased adaptability (for the 140 mm)
+ Very good ratio of performance and noise output.
+ Good bundle
The bad:
– Price, but it should be worth it
– The fans could have had better static pressure"
Specifications
-
Size140 x 140 x 25 mm
-
Screw hole pattern125 x 125 mm / 105 x 105 mm
-
Fan Connector4-pin
-
BearingFDB
-
Number of blades7
-
Rotational speed1500 RPM
-
Noise level30.1 dB (A)
-
Airflow (CFM)78.1
-
Airflow (m3/h)132.7
-
Static pressure1.94 mm H2O
-
Fan input power1.4 W
-
Fan max input current0.2 A
-
Fan input voltage12 V
-
Fan starting voltage7 V
-
Low (0-20%) PWM speed400 RPM
-
Low PWM noise level< 10 dB (A)
-
Low PWM airflow (CFM)24.0
-
Low PWM airflow (m3/h)40.8
-
Low PWM static pressure0.54 mm H2O
-
MTBF150,000 hours
-
Fan weight210 g
-
Cable length500 mm
-
Cable typeBraided all-black ribbon wire
Other
-
Package contentsVenturi Series fan, Screw pack with 4 metal screws, 1->2 PWM signal splitter cable, 4 additional rubber corners, with 105 mm hole pattern
-
Package weight210 g
-
Package dimensions (Including hanging tab)200 x 142 x 30 mm
-
Package dimensions (Excluding hanging tab)167 x 142 x 30 mm
-
EAN7350041083368
-
Product code (Black)FD-FAN-VENT-HP14-PWM-BK
-
Product code (White)FD-FAN-VENT-HP14-PWM-WT
